LED Strip, RGB WS2812B, 144 LEDs/m, 5V, IP65 Bare PCB, White PCB, 1m

This is a high quality "BTF Lighting" brand LED Strip with adhesive. To see online reviews(Google result) for "BTF Lighting" LED Strips  click here.see this page:
google.com/search?q=%22BTF+Lighting%22+led+strip+review

It is 1m long, and has 144 LEDs. The front of the strip(PCB) is coated with silicone, providing it with an IP65 splash resistant rating(not waterproof). It is recommended for indoor use only. The back has an adhesive strip.

Each LED has a built-in chip enabling them to be daisy-chained or controlled individually - all from a single GPIO! The constant-current driver in each LED ensures that colour remains consistent, even if supply-voltage varies slightly from the optimal 5V. The LEDs are factory-calibrated to ensure you have consistent colours all the way along your strip.

The strip can be cut at every LED to get the desired length. It has a 3 pin connectors on two ends, one male and one female. This enables LED strips to be connected in series. If using in series, ensure the power supply can supply enough power.

IMPORTANT

• ONLY power with 5V DC. A higher voltage will DESTROY the LEDs!
• The LED panel comes without a power supply and controller
• Ensure the power supply can provide sufficient power(Amp). Else the voltage will drop below 5V, and the panel will not work.

Specifications

• LED Type: RGB LED
• LED Colours: 3 in 1 LED - Red, Green, Blue
• PCB Colour: White
• IP Rating: IP65
• Length: 1m
• Control Chip: WS2812B
• Power per LED: 0.1W~0.3W (depending how many LEDs are lit)
• Power per meter: 14W~44W (depending how many LEDs are lit)
• Total power for 1m strip: 14W~44W
• Storage Temperature: -40-+50 °C
• Operating Temperature: -25 ~ +50°C
• Recommend power supply: DC5V 10A (50W)
• Manufacturer Part Number: ‎WS2812B1M144LW65 or WS2812B1M144LW65E
• Manufacturer SKU: 100014 or 103490
• Connector Type: 3 Pin Male and Female JST 2.54mm header

Package Includes

1 x LED Strip
1 x 3 Pin Male JST 2.54mm header