OLED and 4 Button iMod

Availability:

10 in stock


SKU: CSC0-076Code: IM4OLED


OLED 128*64 module, 4 Buttons, I2C Interface, 3.3 and 5V. Bare, or with Selection of Pin Header assembled.

$22.05 inc. GST

10 in stock

Description

Important! Note “Header Type” Option above for selecting pin header! See “Pin Headers” sections below for details.

The im4OLED module has a 0.96 128×64 OLED display and 4 buttons. The OLED is controlled via I2C. The 4 buttons are connected to iMod pins 2,4,5 and 6 (2=*, 4=Down, 5=OK, 6=Up).

The pin headers are 1.8″ apart. This module has been designed to fit over 2 iMod ports.

The OLED display is very popular, and there is a lot of information on internet how to use it with Arduino, mbed and other popular platforms. Adafruit sells the same OLED, and has very useful information and Arduino library on their site located here.

The 4 buttons do NOT have any pull up resistors. There is space for a 5 pin SIL bussed resistor network if pull-up resistors are required. Normally the buttons will be connected to a microcontrollers port pins, in which case the pull-up resistors of the ports can be enabled.

The OLED can be configured for 3.3V or 5V via solder jumpers on the back of the board. Default is 3.3V.

This board is part of our iMod product range, and can very easily be added to any of our products that have iMod ports.

Top View

Schematics (pdf format)

Click to enlarge

The im4OLED has two rows of standard 2.54mm (0.1″) pin headers. The rows are 0.7″ apart, allowing this module to be mounted on a breadboard or standard 0.1″ grid prototype board. The picture to the right shows some iMod modules mounted on a standard prototype board.

The pin headers supplied or soldered to this board are selected in the “Header Type” option at the top of this page.

 

Features

  • 0.94″ OLED
  • 128 * 64 pixel OLED
  • 4 Buttons
  • 3.3V or 5V operation
  • Pin Header connectors(if selected in options above) are gold plated for best possible contact
  • Module dimension: 26.5mm x 50.5mm (1.04″ x 1.99″)
  • RoHS Compliant

Pin Headers

By default this board is supplied with No Pin Headers! The following additional options can be selected in the "Header Type" Option at the top of the page (below price):

 

No Pin Headers
Click to enlarge

No pin header is assembled or included with the board.

Loose 3, 4 and 6.0mm Pin Headers
Click to enlarge

Two unsoldered(loose) Pin Headers are supplied with the board for free. The pin(mating) length is 3.0, 4.0 or 6.0mm. The number of pins depends on the iMod board. For most boards two 1x6 pin headers are supplied.
- Select 3.0mm if module is going to be soldered into place.
- Select 6.0mm if module is going to be plugged into standard 8.5mm high Female Socket.
- Select 4.0mm if module is going to be plugged into low profile 5.7mm high Female Socket.

3.0mm Pin Headers
Click to enlarge

Pin headers with 3.0mm long pins are assembled. Select this option if the module is going to be soldered into place. The picture on the right shows an example of an iMod module soldered onto a main board.

Header size (2 to 8 pin) depends on iMod board. Many boards will get a 2 pin header on one side, and a 4 or 5 pin on the other.

4.0mm Pin Headers
Click to enlarge

Pin headers with 4.0mm long pins are assembled. Select this option if the module is going to be plugged into a low profile 5.7mm high female socket (2.54mm grid).

Header size (2 to 8 pin) depends on iMod board. Many boards will get a 2 pin header on one side, and a 4 or 5 pin on the other.

6.0mm Pin Headers
Click to enlarge

Pin headers with 6.0mm long pins are assembled. Select this option if the module is going to be plugged into a standard 2.54mm female socket.

Header size (2 to 8 pins) depends on iMod board. Many boards will get a 2 pin header on one side, and a 4 or 5 pin on the other.

Round Swiss Pin Headers
Click to enlarge

Two 6 Pin headers with Round (Swiss) style pins are assembled. Select this option if the module is going to be plugged into female Round (Swiss) Sockets. This is very useful for prototyping! See picture on the right for some examples.

Typically the 6 pin female socket (low profile version) can be used for the main board.

We stock a range of swiss pin headers, available here.

Press-Fit Headers
Click to enlarge

Press-fit type pins are assembled. They can be pressed into 1.00mm holes on a 1.6mm thick (standard PCB thickness) target board. A press-tool might be required for production assembly. Once fitted to the target board, the board is very secure, and can not be removed by hand any more. The picture on the right shows an example of an iMod module mounted onto main board via press-fit connectors.

We stock a range of press-fit pin headers, available here.

 
 

Code Examples

Arduino

There are many free libraries available for Arduino using this 0.96″ OLED module.

mbed.org

There is plenty of code examples on mbed.org. Just seach for “oled” or “ssd1308 oled” This page contains lots of usefull information too.

Documentation

 

 WebPDFData
im4OLED Datasheet and Schematics   

Order Code

The following codes can be used to order this module with pin headers. See the “Pin Headers” section above for details:

  • -h3l – Two loose 3.0mm Pin Headers are supplied with the board.
  • -h3 – Two 3.0mm Pin Headers are soldered onto the board.
  • -h6 – Two 6.0mm Pin Headers are soldered onto the board.
  • -sw – Two Round Swiss Pin Headers are soldered onto the board.
  • -pf – Two Press-Fit Headers are soldered onto the board.

For example, to order this board with press-fit headers assembled, use the following code:
im4OLED-pf

 

What is included

  • 1 x iMod module, fully assembled, with pin headers (if selected in options above).

Package Includes

1 x Item as described above

[mx_insert-post-ebay slug="ebay-t-default"]
SKU: CSC0-076 Category:

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “OLED and 4 Button iMod”

There are no reviews yet.