LED Strip, RGB WS2812B, 60 LEDs/m, 5V, IP30 Bare PCB, White PCB, 5m

BTF Lighting
Availability:

Out of stock


SKU: LED1-100Code: LS28-RGB-60W-5-IP30-5M

$27.90

Out of stock

This is a high quality "BTF Lighting" brand LED Strip with adhesive. To see online reviews(Google result) for "BTF Lighting" LED Strips  click here.see this page:
google.com/search?q=%22BTF+Lighting%22+led+strip+review

It is 5m long, and has 300 LEDs(60 per meter). It is rated at IP30. It has a bare PCB, with no water protection, and is only for indoor use. The back has an adhesive strip.

Each LED has a built-in chip enabling them to be daisy-chained or controlled individually - all from a single GPIO! The constant-current driver in each LED ensures that colour remains consistent, even if supply-voltage varies slightly from the optimal 5V. The LEDs are factory-calibrated to ensure you have consistent colours all the way along your strip.

The strip can be cut every 3 LEDs, to get the right length. It has a 3 pin connectors on two ends, one male and one female. This enables LED strips to be connected in series. If using in series, ensure the power supply can supply enough power.

The LED strip is made using 50cm lengths of FPCB, so there is a solder point each 50cm on strip. In fact, nearly all the LED strips on the market are manufactured this way, in half-meter lengths.

IMPORTANT

  • ONLY power with 5V DC. A higher voltage will DESTROY the LEDs!
  • The LED panel comes without a power supply and controller
  • Ensure the power supply can provide sufficient power(Amp). Else the voltage will drop below 5V, and the panel will not work.

Specifications

  • LED Type: RGB LED
  • LED Colours: 3 in 1 LED - Red, Green, Blue
  • PCB Colour: White
  • IP Rating: IP30
  • Length: 5m
  • Control Chip: WS2812B
  • Power per LED: 0.1W~0.3W (depending how many LEDs are lit)
  • Power per meter: 6W~18W (depending how many LEDs are lit)
  • Total power for 5m strip: 30W~90W
  • Storage Temperature: -40-+50 °C
  • Operating Temperature: -25 ~ +50°C
  • Recommend power supply: DC5V 20A (100W)
  • Manufacturer Part Number: ‎WS2812B5M60LW30E
  • Manufacturer SKU: 
  • Connector Type: 3 Pin Male and Female JST 2.54mm header

Package Includes

1 x LED Strip
1 x 3 Pin Male JST 2.54mm header

[mx_insert-post-ebay slug="ebay-t-default"]
SKU: LED1-100 Category: Tags: ,
Weight60 g
Voltage

Interface

Brand

Colour

RGB

Length

5m

Series

Resolution

Size

IP Rating