ESP32-S3 Board, 8MB Flash, 2MB RAM, USB Type-C, PCB Antenna

The ESP32-S3 development board is assembled with an original ESP32-S3-WROOM-1 module from Espressif, with 8MB Flash and 2MB PSRAM(ESP32-S3-WROOM-1-N8R2). It is a general-purpose Wi-Fi + Bluetooth® LE MCU module that integrates complete Wi-Fi and Bluetooth LE functions.

PLEASE NOTE: The pin headers are yellow(as shown in photos) or red.

Most of the I/O pins on the module are broken out to the pin headers on both sides of this board for easy interfacing. Developers can either connect peripherals with jumper wires or mount the module on a breadboard.

The ESP32-S3 is a dual-core XTensa LX7 MCU, capable of running at 240 MHz. Apart from its 512 KB of internal SRAM, it also comes with integrated 2.4 GHz, 802.11 b/g/n Wi-Fi and Bluetooth 5 (LE) connectivity that provides long-range support. It has 45 programmable GPIOs and supports a rich set of peripherals. ESP32-S3 supports larger, high-speed octal SPI flash, and PSRAM with configurable data and instruction cache.

There is a RGB WS2812 LED connected to IO38. It has a Red, Green and Blue LED that are individually addressable. There are plenty of examples on the internet showing how to drive a WS2812 LED. For example, Google "WS2812 Arduino" or "WS2812 c code".

This module has 2 USB Type C connectors. The one is used to power the board, for flashing applications to the chip, as well as for communication with the chip via the on-board USB-to-UART bridge. It is connected to a UART of the ESP32 chip via a CH340 chip. The second USB connector is connected to the ESP32-S3 full-speed USB OTG interface, compliant with the USB 1.1 specification. It can also be used to power to the board, for flashing applications to the chip, for communication with the chip using USB 1.1 protocols, as well as for JTAG debugging.

Features

• XTensa dual-core 32-bit LX7 CPU, frequency up to 240MHz
• 2.4 GHz Wi-Fi, EEE 802.11 b/g/n-compliant
• Bluetooth, LE: Bluetooth 5, Bluetooth mesh
• 8 MByte(64Mbit) SPI Flash
• 384 KByte ROM
• 512 KByte SRAM
• 2 MByte(64Mbit) SPI PSRAM
• 16 KB SRAM in RTC
• Communication Interfaces:
  • 2 x I2C
  • 2 x I2S
  • 4 x SPI
  • 3 x UART
  • 1 x USB OTG
• Security:
  • 4096 bit OTP
  • AES, SHA, RSA, ECC and RNG
  • Secure boott, Flash encryption, Digital signature, HMAC module
• Dual Type-C USB connectors
• Reset and User/Firmware buttons
• RGB WS2812 User LED
• Power LED
• Virtual USB port provided by CP2102 for debugging and firmware upgrade
• Compact size of 50.1 x 13mm
• Supply Voltage: 5V via USB
• Circuit Voltage: 3.0 to 3.6V Circuit Operation

Specs and Docs

• PDF SchematicsPDF Schematics:
  99tech.com.au/m/esp32-s3-yd_schematics.pdf
• Altium PCBDOC fileAltium PCBDOC file:
  99tech.com.au/m/esp32-s3-yd_pcbdoc.zip

Package Includes

1 x ESP32-S3 development board
2 x 22 Pin headers, 2.54mm spacing