The E22-400TBL-01 is a high quality LoRa wireless development kit from EBYTE, based around the Semtech SX1268 chip. It consists of the E22-400T22S module, with an added USB serial communication circuit, and an USB and SMA connector.
This development kit includes the LoRa module, USB Cable and 433MHz antenna.
The E22 series is one of the first wireless modules to adopt Semtech's SX1262 and SX1268 RF chips. This chip provides a variety of modulation methods, such as LoRaTM and traditional GFSK. Its special LoRaTM modulation method increases the communication distance.
This module is configured via software for frequencies between 410~493 MHz. The correct antenna has to be used for the programmed frequency. Typical frequencies would be 433MHz in Europe(EU), and 470MHz, 486MHz and 487MHz(China).
These modules are designed and manufactured with quality in mind. High quality capacitors and German Wurth wire wound inductors are used. A temperature compensated crystal oscillator is used for timing, which is critical for low error long distance LoRa communication.
To view the PDF Datasheet for the E22-400TBL-01 module, click here.see this page:
To view the PDF Datasheet for the E22-400T22S module, click here.see this page:
For additional information, see the manufacturer's product page.product page:
- USB Connector: Micro USB Connector
- RF Connectors: U.FL (UFL or IPEX) and SMA connector
- IC: SX1268
- Frequency: 410.125~493.125 MHz (Default: 433MHz)
- Power: 22dBm (Max. Power 160mW)
- Distance: 4km
- Interface: UART and USB
|Working frequency||410.125~493.125 MHz||Default: 433MHz|
|Transmitting power||22 dBm||Max. Power (160mW)|
|Receiving sensitivity||-138 dBm||-|
|Air data rate||0.3k~62.5kbps||-|
|Test distance||4000m||In open and clear air, with maximum power, 5dBi antenna gain, height of 2m|
|Size||58 * 28 mm|
|Antenna type||IPEX / Stamp hole|
|Communication interface||UART and USB|
1 x Wireless Module
1 x USB Cable
1 x 433MHz Antenna